10Gtek
SFP+, 10 Speed, RJ45 copper, RJ45
+Converts SFP+ ports to 10 Gbps copper RJ45
+Reaches up to 30 meters on copper
+Listed for HPE and H3C switches
−Copper RJ45 runs are limited to 30 meters
$29.99-6%Was: $31.99
as of 11/04/2026 03:09 PST - DetailsProduct details
About this product
10Gtek
Direct attach (SFP), 25 Stated speed, 2 to 3
+25Gbps data rate for high-speed server and switch links
+Direct attach SFP28 design for short-range connections
+About 10 ft length suits adjacent rack equipment
−Passive direct attach cable limited to short distances
$32.00
as of 11/04/2026 02:06 PST - DetailsProduct details
Pros+25Gbps data rate for high-speed server and switch links
+Direct attach SFP28 design for short-range connections
+About 10 ft length suits adjacent rack equipment
+Two-pack gives two cables in one order
Cons−Passive direct attach cable limited to short distances
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
Direct attach (SFP), 40 Stated speed, 2 to 3
+9.8 ft length for nearby equipment
+Passive copper design with no power needed
+Pack of 2 to 3 cables
−Copper twinax design limits reach to short distances
No price recorded yet.
Product details
About this product
10Gtek
Direct attach (SFP), 25 Stated speed
+Supports 25 Gbps data rate for high-speed links
+Direct attach SFP form factor for short connections
+6.6 ft length suits rack-to-rack runs
−Short 6.6 ft reach limits placement options
$31.99
as of 11/04/2026 02:06 PST - DetailsProduct details
Pros+Supports 25 Gbps data rate for high-speed links
+Direct attach SFP form factor for short connections
+6.6 ft length suits rack-to-rack runs
+Built for Ubiquiti UniFi UACC-AOC-SFP28-2M connections
Cons−Short 6.6 ft reach limits placement options
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
SFP28, 25 Speed, Multimode fiber, 850 nm
+Supports 25 Gbps over multimode fiber
+Duplex LC connector for fiber links
+Listed for Ubiquiti equipment
−Multimode reach is limited to 100 meters
$19.99
as of 11/04/2026 10:05 PST - DetailsProduct details
About this product
10Gtek
Direct attach (SFP), 40 Stated speed
+Supports 40 Gbps data rate
+Direct attach QSFP+ form factor
+3.3 ft length fits tight equipment layouts
−Very short 3.3 ft reach limits placement
$41.99
as of 11/04/2026 02:06 PST - DetailsProduct details
Pros+Supports 40 Gbps data rate
+Direct attach QSFP+ form factor
+3.3 ft length fits tight equipment layouts
+Built for Dell Networking AOC-QSFP-40G-1M connections
Cons−Very short 3.3 ft reach limits placement
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
SFP, 1 Speed, Single-mode fiber, 10 In the box
+Ten-pack gives ten modules in one purchase
+1310 nm wavelength suits long-distance links
+Compatible with Cisco and Ubiquiti SFP ports
−Limited to 1G speed
$96.00
as of 11/04/2026 10:05 PST - DetailsProduct details
About this product
10Gtek
QSFP28, 100 Speed, Multimode fiber, 850 nm
+100G speed on a QSFP28 multimode module
+850 nm wavelength for multimode fiber
+Uses MPO multi-fiber connector
−Multimode reach of 100m is short for long runs
$39.99
as of 11/04/2026 03:09 PST - DetailsProduct details
About this product
10Gtek
SFP+, 10 Speed, RJ45 copper, RJ45
+SFP+ to RJ45 copper connection for existing Ethernet cabling
+Supports 10 Gbps data rate
+Rated for 30 m copper reach
−Copper RJ45 medium limits reach compared with fiber
$46.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Pros+SFP+ to RJ45 copper connection for existing Ethernet cabling
+Supports 10 Gbps data rate
+Rated for 30 m copper reach
+CAT.6a copper module
Cons−Copper RJ45 medium limits reach compared with fiber
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
SFP, 2.5 Speed, RJ45 copper, RJ45
+SFP form factor with RJ45 copper connection
+Supports 2.5 Gbps data rate
+Rated for 100 m copper reach
−Supports 2.5 Gbps, below 10 Gbps SFP+ speeds
$24.99
as of 11/04/2026 06:06 PST - DetailsProduct details
About this product
10Gtek
10 Speed, 2 Ports, PCIe, RJ45
+Two 10 Gb RJ45 ports for dual connections
+Intel X540 controller
+Low-profile bracket option for small cases
−Uses a full x8 PCIe slot
$49.99
as of 11/04/2026 03:06 PST - DetailsProduct details
About this product
10Gtek
10 Speed, 2 Ports, PCIe, SFP+
+Two 10 Gb SFP+ ports for fiber or direct-attach links
+Intel 82599ES controller
+Low-profile bracket option for small cases
−Uses a full x8 PCIe slot
−SFP+ ports need compatible modules or cables
$59.99
as of 11/04/2026 03:06 PST - DetailsProduct details
Pros+Two 10 Gb SFP+ ports for fiber or direct-attach links
+Intel 82599ES controller
+Low-profile bracket option for small cases
Cons−Uses a full x8 PCIe slot
−SFP+ ports need compatible modules or cables
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
1 Speed, 2 Ports, PCIe, RJ45
+Two 1 Gbps RJ45 ports for dual connections
+Intel I350-AM2 controller
+Low-profile bracket option for small cases
−Only 1 Gbps speed per port
$35.99
as of 11/04/2026 03:06 PST - DetailsProduct details
About this product
10Gtek
25 Speed, 2 Ports, PCIe, SFP28
+Two 25 Gbps SFP28 ports
+PCIe 4.0 x8 interface
+Intel E810 controller
−Uses a full x8 PCIe slot
−SFP28 ports need compatible modules or cables
$194.99
as of 11/04/2026 03:06 PST - DetailsProduct details
Pros+Two 25 Gbps SFP28 ports
+PCIe 4.0 x8 interface
+Intel E810 controller
+SR-IOV support for virtualization
+Low-profile bracket option for small cases
Cons−Uses a full x8 PCIe slot
−SFP28 ports need compatible modules or cables
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
SFP28, 25 Speed, DAC cable
+Supports 25 Gbps over direct attach copper
+Passive design needs no separate optics
+Listed for Juniper equipment
−Reach is limited to 0.5 meters
$13.99
as of 11/04/2026 06:08 PST - DetailsProduct details
About this product
10Gtek
SFP28, 25 Speed, Multimode fiber
+SFP28 form factor for 25G links
+Multimode fiber medium for short-reach optical runs
+Supports 25 Gbps data rate
−Requires compatible multimode fiber cabling
$19.99
as of 11/04/2026 06:06 PST - DetailsProduct details
About this product
10Gtek
0.1 Speed, Single-mode fiber, 2 In the box, SC
+Two-pack for matched media converter pairs
+Single-mode fiber reaches up to 80 km
+Uses SC fiber connectors
−Supports only 10/100 Mbps speeds
$37.99
as of 11/04/2026 10:05 PST - DetailsProduct details
About this product
10Gtek
SFP28, 25 Speed, DAC cable
+25G speed over passive copper cable
+Short 2 m reach for nearby equipment
+Passive direct attach design
−Limited to 2 m reach
$13.99
as of 11/04/2026 03:09 PST - DetailsProduct details
About this product
10Gtek
Direct attach (SFP), 800 Stated speed
+Supports 800 Gbps data rate for very high throughput
+8-channel design for 800G links
+6.6 ft length suits adjacent equipment
−Short 6.6 ft reach limits placement options
$139.99
as of 11/04/2026 02:06 PST - DetailsProduct details
About this product
10Gtek
QSFP28, 100 Speed, Multimode fiber, 850 nm
+100G speed over multimode fiber
+850 nm wavelength for multimode links
+MPO optical fiber connection
−Reach limited to 100 m
$39.99
as of 11/04/2026 03:09 PST - DetailsProduct details
About this product
10Gtek
1.65 ft
+Short 1.65 ft length for tight server rack layouts
+Two-pack gives spare cables for multiple connections
+SlimSAS SFF-8654 8i connector for compact internal connections
−Only 1.65 ft long, which may not reach distant components
No price recorded yet.
Product details
Pros+Short 1.65 ft length for tight server rack layouts
+Two-pack gives spare cables for multiple connections
+SlimSAS SFF-8654 8i connector for compact internal connections
+Compatible with SAS 4.0 storage and server equipment
Cons−Only 1.65 ft long, which may not reach distant components
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
1.6 ft
+Fan-out design splits one SFF-8087 port into four SATA connections
+Two-pack provides two cables for multiple RAID controller ports
+1.6 ft length suits short internal runs
−Short 1.6 ft length limits reach to distant drives
No price recorded yet.
Product details
Pros+Fan-out design splits one SFF-8087 port into four SATA connections
+Two-pack provides two cables for multiple RAID controller ports
+1.6 ft length suits short internal runs
Cons−Short 1.6 ft length limits reach to distant drives
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
2.6 ft
+Two-pack provides two cables for server backplane or RAID card links
+Hot-swap ready for drive replacement workflows
+Includes SATA power connection for drive power
−2.6 ft length may be too short for some chassis layouts
No current price. Check it at the store.
Product details
Pros+Two-pack provides two cables for server backplane or RAID card links
+Hot-swap ready for drive replacement workflows
+Includes SATA power connection for drive power
Cons−2.6 ft length may be too short for some chassis layouts
How pros and cons are picked (About: Disclaimer) About this product
10Gtek
Fiber, OM3, 10 Stated speed, Low smoke (LSZH)
+OM3 multimode fiber for shorter fiber runs
+Low smoke zero halogen jacket
+32.8 ft length for room-scale runs
$9.99
as of 11/04/2026 10:05 PST - DetailsProduct details
About this product
10Gtek
Fiber, OM4
+OM4 multimode fiber for longer fiber runs
+8-core fiber for QSFP+ and QSFP28 transceivers
+9.8 ft length for nearby equipment
$14.99
as of 11/04/2026 02:06 PST - DetailsProduct details
About this product
10Gtek
Fiber, OM3, 400 Stated speed
+OM3 multimode fiber for shorter fiber runs
+49.2 ft length for longer runs
+8 LC connectors for breakout connections
$20.99
as of 11/04/2026 02:06 PST - DetailsProduct details
About this product
10Gtek
10 Drive ports, PCIe 3.0, HBA, JMB582
+Ten SATA ports for many drives
+Uses JMB582 chipset
+PCIe 3.0 interface
$39.39
as of 11/04/2026 02:08 PST - DetailsProduct details
About this product
10Gtek
SFP+, 10 Speed, RJ45 copper, RJ45
+Connects SFP+ ports to standard RJ45 copper cabling
+Supports 10G, 5G and 2.5G speeds
+Up to 30 m reach over copper cabling
$32.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Pros+Connects SFP+ ports to standard RJ45 copper cabling
+Supports 10G, 5G and 2.5G speeds
+Up to 30 m reach over copper cabling
+Compatible with Cisco, MikroTik, Ubiquiti and other listed equipment
How pros and cons are picked (About: Disclaimer) About this product
