TRENDnetSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, LC
+10 Gbps speed for fast network links
+Single-mode fiber reaches up to 10 km
+LC connector for standard fiber cabling
−Single-mode fiber only, not for multimode runs
$44.99
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.3
Pros+10 Gbps speed for fast network links
+Single-mode fiber reaches up to 10 km
+LC connector for standard fiber cabling
+NDAA and TAA compliant
Cons−Single-mode fiber only, not for multimode runs
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP28, 25 Speed, Multimode fiber, 850 nm
+Supports 25 Gbps over multimode fiber
+Duplex LC connector for fiber links
+Listed for Ubiquiti equipment
−Multimode reach is limited to 100 meters
$19.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.3
Pros+Supports 25 Gbps over multimode fiber
+Duplex LC connector for fiber links
+Listed for Ubiquiti equipment
Cons−Multimode reach is limited to 100 meters
Compared with the 243 Network Transceivers on this page+25 speed: only 16 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
OREISpec score 7.7
SFP, 1 Speed, Single-mode fiber, 1310 nm
+Long 40 km reach over single-mode fiber
+1 Gbps speed for gigabit links
+LC duplex connector for standard fiber patch cords
−Single-mode fiber needed for full reach
$49.99
as of 11/04/2026 10:10 PST - DetailsProduct details
Spec score7.7
Pros+Long 40 km reach over single-mode fiber
+1 Gbps speed for gigabit links
+LC duplex connector for standard fiber patch cords
+1310 nm wavelength for single-mode runs
Cons−Single-mode fiber needed for full reach
Compared with the 243 Network Transceivers on this page+40000 reach or length: only 1 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
AvagoSpec score 7.1
SFP+, 10 Speed, Multimode fiber, 850 nm
+Carries 10 Gbps for short-distance links
+850 nm wavelength suits multimode links
+SFP+ form factor for 10G ports
−Reach limited to 300 m
$18.25
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.1
Pros+Carries 10 Gbps for short-distance links
+850 nm wavelength suits multimode links
+SFP+ form factor for 10G ports
Cons−Reach limited to 300 m
Compared with the 243 Network Transceivers on this page+10 speed: only 23 of 180 here have a higher speed
+300 reach or length: 107 of the 192 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) About this product
OREISpec score 7.0
SFP, 1 Speed, Multimode fiber, 850 nm
+1 Gbps speed for gigabit links
+LC duplex connector for standard fiber patch cords
+850 nm wavelength for multimode fiber
−Short 550 m reach limits distance
$19.99
as of 11/04/2026 10:10 PST - DetailsProduct details
Spec score7.0
Pros+1 Gbps speed for gigabit links
+LC duplex connector for standard fiber patch cords
+850 nm wavelength for multimode fiber
+550 m maximum reach over multimode fiber
Cons−Short 550 m reach limits distance
Compared with the 243 Network Transceivers on this page+550 reach or length: 124 of the 192 here have a lower reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
TransutonSpec score 7.1
SFP+, 10 Speed, DAC cable
+10 Gbps speed for fast network links
+Passive DAC cable needs no separate optics
+2 m length for short rack-to-rack connections
−Limited to 2 m reach
$17.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.1
Pros+10 Gbps speed for fast network links
+Passive DAC cable needs no separate optics
+2 m length for short rack-to-rack connections
Cons−Limited to 2 m reach
Compared with the 243 Network Transceivers on this page+10 speed: only 23 of 180 here have a higher speed
−2 reach or length: 145 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
ROBOfiberSpec score 7.1
SFP, 1 Speed, Single-mode fiber, 1310 nm
+Single-strand BiDi design saves fiber strands
+2 km reach for campus links
+LC connector and DDM support listed
−Single-strand operation limits links to 2 km
$19.50
as of 11/04/2026 10:10 PST - DetailsProduct details
Spec score7.1
Pros+Single-strand BiDi design saves fiber strands
+2 km reach for campus links
+LC connector and DDM support listed
Cons−Single-strand operation limits links to 2 km
Compared with the 243 Network Transceivers on this page+2000 reach or length: 136 of the 192 here have a lower reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
ROBOfiberSpec score 7.3
SFP, 1 Speed, Single-mode fiber, 1550 nm
+Single-strand bidirectional design uses one fiber
+20 km reach on single-mode fiber
+1 Gbps rate on an SFP form factor
−Single-strand operation needs matched wavelength pairs at each end
$18.00
as of 11/04/2026 10:10 PST - DetailsProduct details
Spec score7.3
Pros+Single-strand bidirectional design uses one fiber
+20 km reach on single-mode fiber
+1 Gbps rate on an SFP form factor
+LC connector for standard fiber patching
Cons−Single-strand operation needs matched wavelength pairs at each end
Compared with the 243 Network Transceivers on this page+20000 reach or length: only 4 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
CablesAndKitsSpec score 7.2
SFP, 1 Speed, Single-mode fiber
+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
−Single-mode fiber required, not suitable for multimode runs
$23.49
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.2
Pros+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
Cons−Single-mode fiber required, not suitable for multimode runs
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
Generic
2 In the box
+Sold as a pack of 2 units
+Passive design for UTP video transmission
+Works with BNC Cat5 cable for CCTV cameras
−Passive design limits signal reach compared with active units
$6.49
as of 11/04/2026 10:09 PST - DetailsProduct details
Pros+Sold as a pack of 2 units
+Passive design for UTP video transmission
+Works with BNC Cat5 cable for CCTV cameras
+Suited to running camera video over twisted pair
Cons−Passive design limits signal reach compared with active units
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 8.3
QSFP28, 100 Speed, Multimode fiber, 850 nm
+100G speed on a QSFP28 multimode module
+850 nm wavelength for multimode fiber
+Uses MPO multi-fiber connector
−Multimode reach of 100m is short for long runs
$39.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score8.3
Pros+100G speed on a QSFP28 multimode module
+850 nm wavelength for multimode fiber
+Uses MPO multi-fiber connector
Cons−Multimode reach of 100m is short for long runs
Compared with the 243 Network Transceivers on this page+100 speed: the highest speed of the 180 here
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 8.3
0.1 Speed, Single-mode fiber, 2 In the box, SC
+Two-pack for matched media converter pairs
+Single-mode fiber reaches up to 80 km
+Uses SC fiber connectors
−Supports only 10/100 Mbps speeds
$37.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score8.3
Pros+Two-pack for matched media converter pairs
+Single-mode fiber reaches up to 80 km
+Uses SC fiber connectors
Cons−Supports only 10/100 Mbps speeds
Compared with the 243 Network Transceivers on this page+80000 reach or length: the highest reach or length of the 192 here
−0.1 speed: 179 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 8.3
QSFP28, 100 Speed, Multimode fiber, 850 nm
+100G speed over multimode fiber
+850 nm wavelength for multimode links
+MPO optical fiber connection
−Reach limited to 100 m
$39.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score8.3
Pros+100G speed over multimode fiber
+850 nm wavelength for multimode links
+MPO optical fiber connection
Cons−Reach limited to 100 m
Compared with the 243 Network Transceivers on this page+100 speed: the highest speed of the 180 here
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 8.3
QSFP28, 100 Speed, DAC cable
+100 Gbps speed for high-throughput links
+Passive copper cable needs no separate optics
+Compatible with Cisco and Ubiquiti devices
−Only 0.5 m reach limits placement to nearby equipment
$24.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score8.3
Pros+100 Gbps speed for high-throughput links
+Passive copper cable needs no separate optics
+Compatible with Cisco and Ubiquiti devices
+Short 0.5 m length suits adjacent equipment
Cons−Only 0.5 m reach limits placement to nearby equipment
Compared with the 243 Network Transceivers on this page+100 speed: the highest speed of the 180 here
−0.5 reach or length: 171 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 8.3
QSFP28, 100 Speed, Multimode fiber, 850 nm
+100 Gbps speed for high-throughput links
+850 nm wavelength for multimode fiber
+Compatible with Cisco QSFP-100G-SR4-S
−Uses MPO connector rather than a simple duplex port
$29.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score8.3
Pros+100 Gbps speed for high-throughput links
+850 nm wavelength for multimode fiber
+Compatible with Cisco QSFP-100G-SR4-S
Cons−Uses MPO connector rather than a simple duplex port
Compared with the 243 Network Transceivers on this page+100 speed: the highest speed of the 180 here
How pros and cons are picked (About: Disclaimer) About this product
WiitekSpec score 8.3
QSFP28, 100 Speed, DAC cable
+100GbE speed for high-bandwidth links
+QSFP28 form factor for 100 Gbps connections
+Passive copper DAC needs no separate transceivers
−Only 2 m reach limits placement between devices
$35.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score8.3
Pros+100GbE speed for high-bandwidth links
+QSFP28 form factor for 100 Gbps connections
+Passive copper DAC needs no separate transceivers
+Listed compatibility with Mellanox MCP1600-C002
Cons−Only 2 m reach limits placement between devices
Compared with the 243 Network Transceivers on this page+100 speed: the highest speed of the 180 here
−2 reach or length: 145 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.5
QSFP+, 40 Speed, DAC cable
+Breakout design splits one 40G port into four 10G links
+Passive copper cable needs no separate optics
+Compatible with Cisco and Ubiquiti devices
−Only 0.5 m reach limits placement to nearby equipment
$26.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.5
Pros+Breakout design splits one 40G port into four 10G links
+Passive copper cable needs no separate optics
+Compatible with Cisco and Ubiquiti devices
+0.5 m length suits adjacent equipment
Cons−Only 0.5 m reach limits placement to nearby equipment
Compared with the 243 Network Transceivers on this page+40 speed: only 13 of 180 here have a higher speed
−0.5 reach or length: 171 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
FttpvipsSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
−Single-mode fiber needed for operation
$12.71
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.5
Pros+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
+Lists compatibility with several switch brands
Cons−Single-mode fiber needed for operation
Compared with the 243 Network Transceivers on this page+20000 reach or length: only 4 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
QsfptekSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
−Bidirectional design requires a matched pair at each end
$44.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
Cons−Bidirectional design requires a matched pair at each end
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
WtsfoptcSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
−Requires single-mode fiber cabling, not multimode
$12.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.3
Pros+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
+SFP+ form factor for 10 Gbps Ethernet ports
+Listed compatibility with Cisco, MikroTik and Ubiquiti
Cons−Requires single-mode fiber cabling, not multimode
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
UV-CableSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, LC
+Uses LC connectors, a common duplex fiber interface
+Single-mode fiber for longer runs
+10 Gbps speed
−Requires single-mode fiber cabling
$21.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.3
Pros+Uses LC connectors, a common duplex fiber interface
+Single-mode fiber for longer runs
+10 Gbps speed
Cons−Requires single-mode fiber cabling
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP28, 25 Speed, DAC cable
+Supports 25 Gbps over direct attach copper
+Passive design needs no separate optics
+Listed for Juniper equipment
−Reach is limited to 0.5 meters
$13.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.3
Pros+Supports 25 Gbps over direct attach copper
+Passive design needs no separate optics
+Listed for Juniper equipment
Cons−Reach is limited to 0.5 meters
Compared with the 243 Network Transceivers on this page+25 speed: only 16 of 180 here have a higher speed
−0.5 reach or length: 171 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP28, 25 Speed, Multimode fiber
+SFP28 form factor for 25G links
+Multimode fiber medium for short-reach optical runs
+Supports 25 Gbps data rate
−Requires compatible multimode fiber cabling
$19.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.3
Pros+SFP28 form factor for 25G links
+Multimode fiber medium for short-reach optical runs
+Supports 25 Gbps data rate
+Rated for 100 m reach
Cons−Requires compatible multimode fiber cabling
Compared with the 243 Network Transceivers on this page+25 speed: only 16 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP28, 25 Speed, DAC cable
+25G speed over passive copper cable
+Short 2 m reach for nearby equipment
+Passive direct attach design
−Limited to 2 m reach
$13.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+25G speed over passive copper cable
+Short 2 m reach for nearby equipment
+Passive direct attach design
Cons−Limited to 2 m reach
Compared with the 243 Network Transceivers on this page+25 speed: only 16 of 180 here have a higher speed
−2 reach or length: 145 of the 192 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
AndXeSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10 Gbps SFP+ speed
+1310 nm single-mode wavelength
+Reaches up to 10 km
−Requires single-mode fiber
$10.98
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.3
Pros+10 Gbps SFP+ speed
+1310 nm single-mode wavelength
+Reaches up to 10 km
Cons−Requires single-mode fiber
Compared with the 243 Network Transceivers on this page+10000 reach or length: only 23 of 192 here have a higher reach or length
+10 speed: only 23 of 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
GenericSpec score 7.3
1 Speed, Single-mode fiber
+Single-mode fiber suits long-distance links
+1 Gbps speed for standard network transmission
+Designed for data center and IT professional use
−Requires single-mode fiber cabling to operate
$9.59
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.3
Pros+Single-mode fiber suits long-distance links
+1 Gbps speed for standard network transmission
+Designed for data center and IT professional use
Cons−Requires single-mode fiber cabling to operate
Compared with the 243 Network Transceivers on this page+20000 reach or length: only 4 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.3
SFP, 1 Speed, Single-mode fiber, 2 In the box
+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
−Requires single-mode fiber rather than multimode
$23.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.3
Pros+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
+Compatible with Cisco, MikroTik and Ubiquiti devices
+1 Gbps speed for gigabit links
Cons−Requires single-mode fiber rather than multimode
Compared with the 243 Network Transceivers on this page+20000 reach or length: only 4 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
KeensoSpec score 7.3
SFP, 1 Speed, Single-mode fiber, 1310 nm
+Reaches up to 20 km over single-mode fiber
+Operates at 1.25 Gbps speed
+Uses 1310 nm wavelength
−Single-mode fiber only, not for multimode runs
$9.89
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.3
Pros+Reaches up to 20 km over single-mode fiber
+Operates at 1.25 Gbps speed
+Uses 1310 nm wavelength
+SFP form factor fits standard SFP ports
Cons−Single-mode fiber only, not for multimode runs
Compared with the 243 Network Transceivers on this page+20000 reach or length: only 4 of 192 here have a higher reach or length
−1 speed: 123 of the 180 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
