Cisco
SFP+, 10 Speed, Multimode fiber
+Cisco-designed module for Cisco equipment compatibility
+10 Gbps speed in SFP+ form factor
+Multimode fiber suits shorter in-building runs
−Multimode fiber limits distance compared with single-mode
$67.00
as of 11/04/2026 03:09 PST - DetailsProduct details
Pros+Cisco-designed module for Cisco equipment compatibility
+10 Gbps speed in SFP+ form factor
+Multimode fiber suits shorter in-building runs
Cons−Multimode fiber limits distance compared with single-mode
How pros and cons are picked (About: Disclaimer) About this product
Cable MattersSpec score 7.0
SFP, 1 Speed, RJ45 copper, RJ45
+Converts SFP port to standard RJ45 copper Ethernet
+Gigabit speed for 1000BASE-T connections
+Up to 100 m reach over copper cable
−Copper reach limited to 100 m
$19.99-17%List: $23.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.0
Pros+Converts SFP port to standard RJ45 copper Ethernet
+Gigabit speed for 1000BASE-T connections
+Up to 100 m reach over copper cable
+Listed compatible with Cisco, TP-Link, MikroTik and Ubiquiti
Cons−Copper reach limited to 100 m
Compared with the 103 Network Transceivers on this page+100 reach or length: 65 of the 126 here have a lower reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
SpeedyFiberTXSpec score 7.0
SFP+, 10 Speed, RJ45 copper, 1 In the box
+Supports 10 Gbps over standard copper network cable
+Reaches up to 80 m on Cat6a or Cat7 cable
+RJ45 connector works with existing copper cabling
−Copper transceivers run hotter than fiber modules
$49.99-17%List: $59.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.0
Pros+Supports 10 Gbps over standard copper network cable
+Reaches up to 80 m on Cat6a or Cat7 cable
+RJ45 connector works with existing copper cabling
+Multi-rate operation with a Broadcom chipset
+Lists compatibility with Cisco, TP-Link, MikroTik and Ubiquiti equipment
Cons−Copper transceivers run hotter than fiber modules
Compared with the 103 Network Transceivers on this page+80 reach or length: 64 of the 126 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) About this product
StarTech.comSpec score 7.0
SFP+, 10 Speed, DAC cable
+Cisco-compatible SFP+ form factor for 10G links
+10 Gbps speed for 10GbE connections
+Passive direct attach copper cable design
−Reach limited to 1.5 m
$53.51-7%List: $57.39
as of 11/04/2026 03:10 PST - DetailsQsfptekSpec score 7.1
SFP+, 10 Speed, Multimode fiber, 850 nm
+850 nm wavelength for multimode fiber links
+Multimode reach up to 300 m
+SFP+ form factor for 10 Gbps Ethernet ports
$8.49-6%Was: $8.99
as of 11/04/2026 10:08 PST - DetailsProduct details
Spec score7.1
Pros+850 nm wavelength for multimode fiber links
+Multimode reach up to 300 m
+SFP+ form factor for 10 Gbps Ethernet ports
+Listed compatibility with Cisco, MikroTik and Ubiquiti
Compared with the 103 Network Transceivers on this page+300 reach or length: 81 of the 126 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.0
SFP+, 10 Speed, AOC cable
+10 Gbps speed for fast server and switch links
+Active optical design with built-in SFP+ transceivers
+Compatible with Cisco, MikroTik and Ubiquiti devices
−Reach limited to 5 m for this model
$18.04-5%Was: $18.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.0
Pros+10 Gbps speed for fast server and switch links
+Active optical design with built-in SFP+ transceivers
+Compatible with Cisco, MikroTik and Ubiquiti devices
+5 m reach covers typical rack distances
Cons−Reach limited to 5 m for this model
Compared with the 103 Network Transceivers on this page−5 reach or length: 84 of the 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
LynxcelSpec score 7.0
SFP, 1 Speed, Multimode fiber, 2 In the box
+550 m reach over multimode fiber
+Dual LC connector for standard fiber patching
+Two-pack for multiple links
−Multimode fiber only, not for long single-mode runs
$14.83-5%Was: $15.61
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.0
Pros+550 m reach over multimode fiber
+Dual LC connector for standard fiber patching
+Two-pack for multiple links
+Lists compatibility with Cisco, MikroTik, Ubiquiti and TP-Link switches
+1 Gbps speed for gigabit fiber links
Cons−Multimode fiber only, not for long single-mode runs
Compared with the 103 Network Transceivers on this page+550 reach or length: 90 of the 126 here have a lower reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
6COMSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 10 In the box
+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+10 km single-mode reach
$94.99-5%Was: $99.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+10 km single-mode reach
+LC dual connector for fiber links
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
H!Fiber.comSpec score 7.0
SFP, 1 Speed, RJ45 copper, 2 In the box
+Converts SFP ports to RJ45 copper Ethernet connections
+Supports 1 Gbps speed over copper cabling
+Two modules included in the pack
−Limited to 1 Gbps speed, below faster SFP+ options
$18.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.0
Pros+Converts SFP ports to RJ45 copper Ethernet connections
+Supports 1 Gbps speed over copper cabling
+Two modules included in the pack
+Reach of 100 meters over copper
+Named compatibility with Cisco, TP-Link, MikroTik and Ubiquiti
Cons−Limited to 1 Gbps speed, below faster SFP+ options
Compared with the 103 Network Transceivers on this page+100 reach or length: 65 of the 126 here have a lower reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
WttogtecSpec score 7.0
SFP, 1 Speed, RJ45 copper, RJ45
+Copper RJ45 connector for standard Ethernet cabling
+1 Gbps speed for gigabit copper networks
+Lists compatibility with Cisco, TP-Link and Ubiquiti hardware
−Copper reach is limited to 100 m
$8.91-10%Was: $9.90
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.0
Pros+Copper RJ45 connector for standard Ethernet cabling
+1 Gbps speed for gigabit copper networks
+Lists compatibility with Cisco, TP-Link and Ubiquiti hardware
Cons−Copper reach is limited to 100 m
Compared with the 103 Network Transceivers on this page+100 reach or length: 65 of the 126 here have a lower reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
Cable MattersSpec score 7.0
SFP, 1 Speed, Multimode fiber, 2 In the box
+Two-pack for multiple gigabit fiber links
+Up to 550 m reach over multimode fiber
+850 nm wavelength for multimode operation
−Multimode fiber only, limited to 550 m
$24.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.0
Pros+Two-pack for multiple gigabit fiber links
+Up to 550 m reach over multimode fiber
+850 nm wavelength for multimode operation
+LC connector for standard fiber patching
+Listed compatible with Cisco, TP-Link, MikroTik and Ubiquiti
Cons−Multimode fiber only, limited to 550 m
Compared with the 103 Network Transceivers on this page+550 reach or length: 90 of the 126 here have a lower reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
XzsnetSpec score 7.2
SFP, 1 Speed, Single-mode fiber, 4 In the box
+Pack of 4 modules
+1 Gbps single-mode LC connector
+10 km reach
−Single-mode fiber only
$34.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.2
Pros+Pack of 4 modules
+1 Gbps single-mode LC connector
+10 km reach
+Works with Cisco, MikroTik and Ubiquiti equipment
Cons−Single-mode fiber only
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
XzsnetSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 4 In the box
+Uses LC connectors, a common duplex fiber interface
+1310 nm wavelength
+Pack of four modules
−Requires single-mode fiber cabling
$41.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.3
Pros+Uses LC connectors, a common duplex fiber interface
+1310 nm wavelength
+Pack of four modules
+Single-mode fiber for longer runs
+Lists Cisco and MikroTik compatibility
Cons−Requires single-mode fiber cabling
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.0
SFP+, 10 Speed, DAC cable
+10 Gbps speed for fast server and switch links
+Passive copper cable needs no separate optics
+1 m length suits adjacent rack equipment
−Only 1 m reach limits placement to nearby equipment
$12.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.0
Pros+10 Gbps speed for fast server and switch links
+Passive copper cable needs no separate optics
+1 m length suits adjacent rack equipment
+Compatible with Cisco, TP-Link, MikroTik and Ubiquiti devices
Cons−Only 1 m reach limits placement to nearby equipment
Compared with the 103 Network Transceivers on this page−1 reach or length: 101 of the 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
ElfcamSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+10 Gbps speed in SFP+ form factor
+20 km reach over single-mode fiber
+Sold as a pair of two modules
−Requires a matching BiDi module at the far end
$59.99
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.5
Pros+10 Gbps speed in SFP+ form factor
+20 km reach over single-mode fiber
+Sold as a pair of two modules
Cons−Requires a matching BiDi module at the far end
Compared with the 103 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
StarTech.comSpec score 7.0
SFP+, 10 Speed, DAC cable
+Cisco-compatible SFP+ form factor for 10G links
+Short 1 m reach suits connecting nearby equipment
+10 Gbps speed for 10GbE connections
−Reach limited to 1 m
$44.40
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.0
Pros+Cisco-compatible SFP+ form factor for 10G links
+Short 1 m reach suits connecting nearby equipment
+10 Gbps speed for 10GbE connections
+Passive direct attach copper cable design
Cons−Reach limited to 1 m
Compared with the 103 Network Transceivers on this page−1 reach or length: 101 of the 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
TimaxkSpec score 7.0
SFP+, 10 Speed, RJ45 copper, 2 In the box
+Converts SFP+ ports to 10GBase-T copper Ethernet
+Pack of 2 modules
+Lists compatibility with Cisco, Ubiquiti and MikroTik
−Copper reach limited to 30 meters
$79.99
as of 11/04/2026 10:10 PST - DetailsProduct details
About this product
CablesAndKitsSpec score 7.2
SFP, 1 Speed, Single-mode fiber
+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
−Single-mode fiber required, not suitable for multimode runs
$23.49
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.2
Pros+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
Cons−Single-mode fiber required, not suitable for multimode runs
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
GiqitckSpec score 8.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Pair of modules for a 60 km single-mode link
+Simplex LC connector on each module
+Supports 10 Gbps speed
−Requires two modules on opposite fiber strands
−Uses single-mode fiber only
$65.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score8.3
Pros+Pair of modules for a 60 km single-mode link
+Simplex LC connector on each module
+Supports 10 Gbps speed
+Works with Cisco and Ubiquiti equipment
Cons−Requires two modules on opposite fiber strands
−Uses single-mode fiber only
Compared with the 103 Network Transceivers on this page+60000 reach or length: the highest reach or length of the 126 here
How pros and cons are picked (About: Disclaimer) About this product
FttpvipsSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
−Single-mode fiber needed for operation
$12.71
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.5
Pros+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
+Lists compatibility with several switch brands
Cons−Single-mode fiber needed for operation
Compared with the 103 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
GESDSpec score 7.4
SFP, 1 Speed, Single-mode fiber, 10 In the box
+Pack of 10 modules for multiple ports
+Single-mode LC connector with 20 km reach
+1310 nm wavelength with DDM support
−Limited to 1 Gbps speed
$104.41
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.4
Pros+Pack of 10 modules for multiple ports
+Single-mode LC connector with 20 km reach
+1310 nm wavelength with DDM support
+Works with Cisco, TP-Link, MikroTik and Ubiquiti equipment
Cons−Limited to 1 Gbps speed
Compared with the 103 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.4
SFP, 1 Speed, Single-mode fiber, 2 In the box
+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
−Requires single-mode fiber rather than multimode
$23.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.4
Pros+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
+Compatible with Cisco, MikroTik and Ubiquiti devices
+1 Gbps speed for gigabit links
Cons−Requires single-mode fiber rather than multimode
Compared with the 103 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
QsfptekSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
−Bidirectional design requires a matched pair at each end
$44.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
Cons−Bidirectional design requires a matched pair at each end
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
WtsfoptcSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
−Requires single-mode fiber cabling, not multimode
$12.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.3
Pros+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
+SFP+ form factor for 10 Gbps Ethernet ports
+Listed compatibility with Cisco, MikroTik and Ubiquiti
Cons−Requires single-mode fiber cabling, not multimode
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.2
SFP, 1 Speed, Single-mode fiber, 10 In the box
+Ten-pack gives ten modules in one purchase
+1310 nm wavelength suits long-distance links
+Compatible with Cisco and Ubiquiti SFP ports
−Limited to 1G speed
$96.00
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.2
Pros+Ten-pack gives ten modules in one purchase
+1310 nm wavelength suits long-distance links
+Compatible with Cisco and Ubiquiti SFP ports
Cons−Limited to 1G speed
Compared with the 103 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
FttpvipsSpec score 7.1
SFP+, 10 Speed, Multimode fiber, 10 In the box
+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+400m reach over multimode fiber
−Multimode reach is shorter than single-mode options
$137.11
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.1
Pros+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+400m reach over multimode fiber
+LC connector with 850 nm wavelength
Cons−Multimode reach is shorter than single-mode options
Compared with the 103 Network Transceivers on this page+400 reach or length: 87 of the 126 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) About this product
Cable MattersSpec score 7.1
SFP+, 10 Speed, Multimode fiber, 2 In the box
+Two-pack for multiple 10G fiber links
+10G speed in SFP+ form factor
+Up to 300 m reach over multimode fiber
−Multimode fiber only, limited to 300 m
$35.00
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.1
Pros+Two-pack for multiple 10G fiber links
+10G speed in SFP+ form factor
+Up to 300 m reach over multimode fiber
+LC connector for standard fiber patching
+Listed compatible with Cisco, TP-Link, MikroTik and Ubiquiti
Cons−Multimode fiber only, limited to 300 m
Compared with the 103 Network Transceivers on this page+300 reach or length: 81 of the 126 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) About this product
6COMSpec score 7.0
SFP+, 10 Speed, RJ45 copper, RJ45
+Supports 1.25, 2.5, 5 and 10 Gbps copper speeds
+Works with RJ45 copper cabling
+Lists compatibility with Cisco, MikroTik and Ubiquiti hardware
−Copper reach is limited to 30 m
$29.99
as of 11/04/2026 03:09 PST - DetailsProduct details
About this product
