6COMSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 10 In the box
+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+10 km single-mode reach
$94.99-5%Was: $99.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+Pack of 10 modules for multiple ports
+10 Gbps SFP+ speed
+10 km single-mode reach
+LC dual connector for fiber links
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
XzsnetSpec score 7.2
SFP, 1 Speed, Single-mode fiber, 4 In the box
+Pack of 4 modules
+1 Gbps single-mode LC connector
+10 km reach
−Single-mode fiber only
$34.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.2
Pros+Pack of 4 modules
+1 Gbps single-mode LC connector
+10 km reach
+Works with Cisco, MikroTik and Ubiquiti equipment
Cons−Single-mode fiber only
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
XzsnetSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 4 In the box
+Uses LC connectors, a common duplex fiber interface
+1310 nm wavelength
+Pack of four modules
−Requires single-mode fiber cabling
$41.99
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.3
Pros+Uses LC connectors, a common duplex fiber interface
+1310 nm wavelength
+Pack of four modules
+Single-mode fiber for longer runs
+Lists Cisco and MikroTik compatibility
Cons−Requires single-mode fiber cabling
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
ElfcamSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+10 Gbps speed in SFP+ form factor
+20 km reach over single-mode fiber
+Sold as a pair of two modules
−Requires a matching BiDi module at the far end
$59.99
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.5
Pros+10 Gbps speed in SFP+ form factor
+20 km reach over single-mode fiber
+Sold as a pair of two modules
Cons−Requires a matching BiDi module at the far end
Compared with the 33 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
CablesAndKitsSpec score 7.2
SFP, 1 Speed, Single-mode fiber
+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
−Single-mode fiber required, not suitable for multimode runs
$23.49
as of 11/04/2026 10:09 PST - DetailsProduct details
Spec score7.2
Pros+Gigabit speed for 1000BASE-LX links
+10 km reach over single-mode fiber
+Listed compatible with Cisco equipment
Cons−Single-mode fiber required, not suitable for multimode runs
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
RiteAVSpec score 8.3
QSFP56+, 400 Speed, Single-mode fiber, 1310 nm
+400 Gbps speed in QSFP-DD form factor
+Listed 1310 nm wavelength
+Cisco-compatible design with DOM monitoring
−Reach limited to 500 m
$7,200.00
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score8.3
Pros+400 Gbps speed in QSFP-DD form factor
+Listed 1310 nm wavelength
+Cisco-compatible design with DOM monitoring
Cons−Reach limited to 500 m
Compared with the 33 Network Transceivers on this page+400 speed: the highest speed of the 132 here
+500 reach or length: 89 of the 126 here have a lower reach or length
How pros and cons are picked (About: Disclaimer) 6COMSpec score 7.5
QSFP28, 100 Speed, Single-mode fiber, LC
+100 Gbps speed in a QSFP28 form factor
+Single-mode LC connector with 10 km reach
+Compatible with Cisco QSFP-100G-LR4-S
−Single-mode fiber only
$194.10
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.5
Pros+100 Gbps speed in a QSFP28 form factor
+Single-mode LC connector with 10 km reach
+Compatible with Cisco QSFP-100G-LR4-S
+DDM monitoring listed
Cons−Single-mode fiber only
Compared with the 33 Network Transceivers on this page+100 speed: only 1 of 132 here have a higher speed
+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
6COMSpec score 7.5
QSFP28, 100 Speed, Single-mode fiber, 1310 nm
+100 Gb/s speed for high-bandwidth fiber links
+10 km single-mode reach for long-distance links
+1310 nm wavelength for single-mode fiber
−Requires single-mode fiber, not multimode
−Only 10 km maximum reach
$189.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.5
Pros+100 Gb/s speed for high-bandwidth fiber links
+10 km single-mode reach for long-distance links
+1310 nm wavelength for single-mode fiber
+LC connector for standard duplex fiber cabling
+QSFP28 form factor for 100G switch ports
Cons−Requires single-mode fiber, not multimode
−Only 10 km maximum reach
Compared with the 33 Network Transceivers on this page+100 speed: only 1 of 132 here have a higher speed
+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
GiqitckSpec score 8.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Pair of modules for a 60 km single-mode link
+Simplex LC connector on each module
+Supports 10 Gbps speed
−Requires two modules on opposite fiber strands
−Uses single-mode fiber only
$65.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score8.3
Pros+Pair of modules for a 60 km single-mode link
+Simplex LC connector on each module
+Supports 10 Gbps speed
+Works with Cisco and Ubiquiti equipment
Cons−Requires two modules on opposite fiber strands
−Uses single-mode fiber only
Compared with the 33 Network Transceivers on this page+60000 reach or length: the highest reach or length of the 126 here
How pros and cons are picked (About: Disclaimer) About this product
HPC OpticsSpec score 7.5
QSFP28, 100 Speed, Single-mode fiber
+100G speed for high-bandwidth network links
+Single-mode fiber for links up to 10 km
+QSFP28 form factor for dense 100G port use
−Single-mode fiber needed; not for short multimode runs
$425.00
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.5
Pros+100G speed for high-bandwidth network links
+Single-mode fiber for links up to 10 km
+QSFP28 form factor for dense 100G port use
+Single-lambda LR1 design for 100GBASE-LR1 standard
Cons−Single-mode fiber needed; not for short multimode runs
Compared with the 33 Network Transceivers on this page+100 speed: only 1 of 132 here have a higher speed
+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
FttpvipsSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
−Single-mode fiber needed for operation
$12.71
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.5
Pros+10G speed over single-mode fiber
+20 km reach for longer links
+LC connector for common fiber patching
+Lists compatibility with several switch brands
Cons−Single-mode fiber needed for operation
Compared with the 33 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
GESDSpec score 7.4
SFP, 1 Speed, Single-mode fiber, 10 In the box
+Pack of 10 modules for multiple ports
+Single-mode LC connector with 20 km reach
+1310 nm wavelength with DDM support
−Limited to 1 Gbps speed
$104.41
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.4
Pros+Pack of 10 modules for multiple ports
+Single-mode LC connector with 20 km reach
+1310 nm wavelength with DDM support
+Works with Cisco, TP-Link, MikroTik and Ubiquiti equipment
Cons−Limited to 1 Gbps speed
Compared with the 33 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.4
SFP, 1 Speed, Single-mode fiber, 2 In the box
+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
−Requires single-mode fiber rather than multimode
$23.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.4
Pros+Pack of two modules for a matched pair
+Single-mode fiber supports up to 20 km reach
+Bidirectional 1550/1310 nm design uses one fiber strand
+Compatible with Cisco, MikroTik and Ubiquiti devices
+1 Gbps speed for gigabit links
Cons−Requires single-mode fiber rather than multimode
Compared with the 33 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
QsfptekSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
−Bidirectional design requires a matched pair at each end
$44.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.3
Pros+Pack of two transceivers for a matched pair
+10 Gbps speed over single-mode fiber
+Lists compatibility with Cisco hardware
Cons−Bidirectional design requires a matched pair at each end
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
WtsfoptcSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
−Requires single-mode fiber cabling, not multimode
$12.99
as of 11/04/2026 06:08 PST - DetailsProduct details
Spec score7.3
Pros+Single-mode fiber for links up to 10 km
+LC connector for standard fiber patch cords
+1310 nm wavelength for long-reach single-mode links
+SFP+ form factor for 10 Gbps Ethernet ports
+Listed compatibility with Cisco, MikroTik and Ubiquiti
Cons−Requires single-mode fiber cabling, not multimode
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.2
SFP, 1 Speed, Single-mode fiber, 10 In the box
+Ten-pack gives ten modules in one purchase
+1310 nm wavelength suits long-distance links
+Compatible with Cisco and Ubiquiti SFP ports
−Limited to 1G speed
$96.00
as of 11/04/2026 10:05 PST - DetailsProduct details
Spec score7.2
Pros+Ten-pack gives ten modules in one purchase
+1310 nm wavelength suits long-distance links
+Compatible with Cisco and Ubiquiti SFP ports
Cons−Limited to 1G speed
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
AddOn
QSFP28, 100 Speed, Single-mode fiber
+100 Gbps speed for high-bandwidth network links
+QSFP28 form factor fits 100G-capable ports
+Single-mode fiber medium for long-distance runs
−Single-mode fiber requires compatible fiber cabling
$7,141.07
as of 11/04/2026 06:06 PST - DetailsProduct details
Pros+100 Gbps speed for high-bandwidth network links
+QSFP28 form factor fits 100G-capable ports
+Single-mode fiber medium for long-distance runs
+TAA compliant for approved government purchasing
+Designed to be compatible with Cisco equipment
Cons−Single-mode fiber requires compatible fiber cabling
Compared with the 33 Network Transceivers on this page+100 speed: only 1 of 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
AlvironSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+10 Gb speed for fast network connections
+Two-module pack for matched bidirectional links
+Up to 10 km reach over single-mode fiber
−Bidirectional pairs must be installed as matched modules
No price recorded yet.
Product details
Spec score7.3
Pros+10 Gb speed for fast network connections
+Two-module pack for matched bidirectional links
+Up to 10 km reach over single-mode fiber
+Cisco-compatible design for Cisco equipment
Cons−Bidirectional pairs must be installed as matched modules
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
GenericSpec score 7.3
SFP28, 25 Speed, Single-mode fiber
+SFP28 form factor for 25G connections
+Single-mode fiber with 10 km reach
+Cisco-compatible design listed
−Single-mode fiber needs compatible cabling
No price recorded yet.
Product details
Spec score7.3
Pros+SFP28 form factor for 25G connections
+Single-mode fiber with 10 km reach
+Cisco-compatible design listed
Cons−Single-mode fiber needs compatible cabling
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
+25 speed: only 26 of 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
XzsnetSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+10 Gbps speed for fast network links
+Single-mode fiber with 10 km reach
+LC connector for fiber patch cords
No price recorded yet.
Product details
Spec score7.3
Pros+10 Gbps speed for fast network links
+Single-mode fiber with 10 km reach
+LC connector for fiber patch cords
+Pack of 2 modules
+Lists compatibility with Cisco, MikroTik and Ubiquiti equipment
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
Fiber MallSpec score 7.7
QSFP28, 100 Speed, Single-mode fiber, 1310 nm
+Delivers 100 Gbps over single-mode fiber
+Reaches up to 20 km over single-mode fiber
+Uses LC connectors for common fiber patch cords
$429.99
as of 11/04/2026 03:09 PST - DetailsProduct details
Spec score7.7
Pros+Delivers 100 Gbps over single-mode fiber
+Reaches up to 20 km over single-mode fiber
+Uses LC connectors for common fiber patch cords
+QSFP28 form factor for high-density 100G ports
Compared with the 33 Network Transceivers on this page+100 speed: only 1 of 132 here have a higher speed
+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
GESDSpec score 7.5
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+Two modules in one pack
+10 Gbps speed for SFP+ ports
+20 km reach over single-mode fiber
$31.41
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.5
Pros+Two modules in one pack
+10 Gbps speed for SFP+ ports
+20 km reach over single-mode fiber
+LC connector for standard fiber patch cords
+Lists Cisco, Ubiquiti and TP-Link compatibility
Compared with the 33 Network Transceivers on this page+20000 reach or length: only 1 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10G speed for standard server and switch links
+Single-mode fiber with up to 10 km reach
+1310 nm wavelength for long-distance fiber links
$17.99
as of 11/04/2026 10:08 PST - DetailsProduct details
Spec score7.3
Pros+10G speed for standard server and switch links
+Single-mode fiber with up to 10 km reach
+1310 nm wavelength for long-distance fiber links
+LC connector for standard fiber patch cables
+Compatible with Cisco, Mikrotik, TP-Link and Ubiquiti equipment
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
10GtekSpec score 7.3
SFP28, 25 Speed, Single-mode fiber, 1310 nm
+Supports 25 Gbps over single-mode fiber
+Reaches up to 10 kilometers
+Duplex LC connector for fiber links
$22.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.3
Pros+Supports 25 Gbps over single-mode fiber
+Reaches up to 10 kilometers
+Duplex LC connector for fiber links
+Listed for Cisco and Ubiquiti equipment
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
+25 speed: only 26 of 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
IpolexSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+Supports 10 Gbps over single-mode fiber
+Long 10 km reach for single-mode runs
+Uses LC connectors
$13.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.3
Pros+Supports 10 Gbps over single-mode fiber
+Long 10 km reach for single-mode runs
+Uses LC connectors
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
QiniyekSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 2 In the box
+10 Gbps speed in SFP+ form factor
+Duplex LC connector for standard fiber patching
+Pack of 2 modules included
$19.99
as of 11/04/2026 06:07 PST - DetailsProduct details
Spec score7.3
Pros+10 Gbps speed in SFP+ form factor
+Duplex LC connector for standard fiber patching
+Pack of 2 modules included
+Lists compatibility with Cisco, MikroTik and Ubiquiti
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
StarTech.comSpec score 7.3
SFP+, 10 Speed, Single-mode fiber, 1310 nm
+10 Gbps speed over single-mode fiber
+Reaches up to 10 km
+1310 nm wavelength with LC connector
$99.99
as of 11/04/2026 03:10 PST - DetailsProduct details
Spec score7.3
Pros+10 Gbps speed over single-mode fiber
+Reaches up to 10 km
+1310 nm wavelength with LC connector
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
How pros and cons are picked (About: Disclaimer) About this product
LemspumSpec score 7.2
SFP, 1 Speed, Single-mode fiber, 1310 nm
+1310 nm wavelength suits single-mode gigabit links
+DDM monitoring included for link status
+Lists compatibility with Cisco, TP-Link and Ubiquiti hardware
$3.99
as of 11/04/2026 06:06 PST - DetailsProduct details
Spec score7.2
Pros+1310 nm wavelength suits single-mode gigabit links
+DDM monitoring included for link status
+Lists compatibility with Cisco, TP-Link and Ubiquiti hardware
Compared with the 33 Network Transceivers on this page+10000 reach or length: only 8 of 126 here have a higher reach or length
−1 speed: 107 of the 132 here have a higher speed
How pros and cons are picked (About: Disclaimer) About this product
