Skil
Table, Corded, 10 in, 13 A and up
+Folding stand makes transport easier
+13 amp or higher corded motor
+10 inch blade for cutting wider boards
−Corded power limits movement away from an outlet
$299.00-9%List: $329.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Skil
Circular, Corded, 6 to 7-1/2 in, 13 A and up
+Lightweight worm drive design for easier handling
+15-amp motor for demanding cutting work
+Corded design gives continuous power without batteries
−Corded power limits movement away from an outlet
−Motor of 13 amps or more draws more power than smaller saws
$219.00
as of 11/04/2026 03:39 PST - DetailsProduct details
Pros+Lightweight worm drive design for easier handling
+15-amp motor for demanding cutting work
+Corded design gives continuous power without batteries
+Accepts 6 to 7-1/2 inch blades
Cons−Corded power limits movement away from an outlet
−Motor of 13 amps or more draws more power than smaller saws
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Miter, Corded, 12 in, 13 A and up
+Uses a 12-inch blade for wide cuts in boards
+Corded design gives steady power without battery swaps
+Single bevel compound cutting for angled cuts
−Corded use limits reach to the nearest outlet
$299.99
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+Uses a 12-inch blade for wide cuts in boards
+Corded design gives steady power without battery swaps
+Single bevel compound cutting for angled cuts
Cons−Corded use limits reach to the nearest outlet
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Miter, Corded, 10 in, 13 A and up
+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
−Single bevel tilts in one direction only
−Corded power limits where it can be used
$277.00
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
Cons−Single bevel tilts in one direction only
−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Vevor
Miter, Corded, 10 in, 13 A and up
+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
$289.90
as of 11/04/2026 07:36 PST - DetailsProduct details
Pros+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
+LED laser alignment for cut guidance
+60-tooth blade for fine crosscuts
How pros and cons are picked (About: Disclaimer) About this product
WEN
Miter, Corded, 10 in, 13 A and up
+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
−Corded power requires a nearby outlet
$257.50-30%List: $369.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
+LED cutline for marking cut lines
+Fan-assisted dust collection
Cons−Corded power requires a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Miter, Corded, 12 in, 13 A and up
+12-inch blade for wider stock than standard miter saws
+Sliding design for cutting wide boards
+Built-in laser guide for marking the cut line
−Corded power limits where it can be used
−Heavy for carrying between job sites
$269.97-10%List: $299.97
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+12-inch blade for wider stock than standard miter saws
+Sliding design for cutting wide boards
+Built-in laser guide for marking the cut line
+13 A motor for demanding cuts
+Dual bevel for angled cuts in both directions
Cons−Corded power limits where it can be used
−Heavy for carrying between job sites
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Table, 8 to 9 in, 13 A and up
+Portable design for moving between work areas
+13 A motor for strong cutting power
+Dustless design keeps the work area cleaner
−8.5-inch blade limits maximum depth of cut
$237.47-5%Was: $249.97
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Portable design for moving between work areas
+13 A motor for strong cutting power
+Dustless design keeps the work area cleaner
+Bevel range of 0 to 45 degrees
Cons−8.5-inch blade limits maximum depth of cut
How pros and cons are picked (About: Disclaimer) About this product
Makita
Reciprocating, Corded, 13 A and up
+15 amp motor for heavy-duty demolition work
+Corded power for continuous operation
+AVT anti-vibration technology
$259.00-5%Was: $274.00
as of 11/04/2026 00:05 PST - DetailsProduct details
About this product
Prostormer
Table, 10 in, 13 A and up
+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
−Corded power limits where it can be used
$209.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
+45° bevel cutting for angled cuts
+Benchtop design suits a small workspace
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Prostormer
Miter, 12 in, 13 A and up
+12-inch blade for wider and deeper crosscuts
+13 A motor for steady cutting power
+Sliding head allows cuts across wide boards
−Corded power limits where it can be used
$249.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+12-inch blade for wider and deeper crosscuts
+13 A motor for steady cutting power
+Sliding head allows cuts across wide boards
+Miter and bevel cutting from 0 to 45°
+Built-in LED light for the cut line
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
WEN
Miter, Corded, 10 in, 13 A and up
+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
−Single-bevel design only tilts in one direction
$204.00-20%List: $254.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
+Corded 13 A and up motor needs no battery
Cons−Single-bevel design only tilts in one direction
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Miter, Corded, 10 in, 13 A and up
+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
−Single bevel tilts in one direction only
−Corded power limits where it can be used
$289.59-1%Was: $291.59
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
+Includes safety goggles
Cons−Single bevel tilts in one direction only
−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Makita
Circular, Corded, 6 to 7-1/2 in, 13 A and up
+Electric brake stops the blade quickly after release
+Magnesium housing for a lighter saw body
+Built-in LED light illuminates the cut line
−Corded operation needs a nearby power outlet
$264.00
as of 11/04/2026 00:05 PST - DetailsProduct details
Pros+Electric brake stops the blade quickly after release
+Magnesium housing for a lighter saw body
+Built-in LED light illuminates the cut line
+15 amp motor for cutting through thicker lumber
+Includes a carrying case for storage
Cons−Corded operation needs a nearby power outlet
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Miter, Corded, 10 in, 13 A and up
+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
−Corded, so it needs an outlet nearby
$269.96
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
+Laser guide for marking cut lines
+Includes three TCT blades
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Prostormer
Miter, Corded, 12 in, 13 A and up
+12-inch blade for wider and deeper crosscuts
+13 A motor for steady cutting power
+Double bevel from 0 to 45° for angled cuts on both sides
−Corded power limits where it can be used
$249.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+12-inch blade for wider and deeper crosscuts
+13 A motor for steady cutting power
+Double bevel from 0 to 45° for angled cuts on both sides
+Sliding head allows cuts across wide boards
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Reciprocating, Corded, 13 A and up
+14-amp class motor for heavy-duty cutting
+Corded power for continuous operation
+Reciprocating design for demolition and pruning cuts
−Corded design needs a nearby power outlet
$219.00
as of 11/04/2026 13:41 PST - DetailsProduct details
About this product
Vevor
Table, Corded, 13 A and up
+Portable jobsite design for moving between sites
+4500 RPM cutting speed
+13 amp motor for demanding cuts
−Corded power requires a nearby outlet
$249.90
as of 11/04/2026 07:36 PST - DetailsProduct details
About this product
FinerFurnis
Table, Corded, 10 in, 13 A and up
+10 inch blade suits common benchtop cuts
+Includes a stand for stable placement
+Portable benchtop design for moving between spots
−Corded, so it needs an outlet nearby
$265.99
as of 11/03/2026 22:57 PST - DetailsProduct details
Pros+10 inch blade suits common benchtop cuts
+Includes a stand for stable placement
+Portable benchtop design for moving between spots
+Dust collector included for cleaner work
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Prostormer
Table, Corded, 10 in, 13 A and up
+10-inch blade for standard cutting depth
+Heavy-duty stand included for stable setup
+Blade height adjustable for varied cut depths
−Requires a corded power connection
$209.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+10-inch blade for standard cutting depth
+Heavy-duty stand included for stable setup
+Blade height adjustable for varied cut depths
+Supports 90° crosscuts and 0-45° bevel cuts
Cons−Requires a corded power connection
How pros and cons are picked (About: Disclaimer) About this product
MarvTool
Miter, Corded, 10 in, 13 A and up
+10 in blade for wide crosscuts
+15 amp motor for sustained cutting power
+Extension table for supporting long boards
−Corded power limits placement to outlet reach
$259.98
as of 11/04/2026 09:37 PST - DetailsProduct details
Pros+10 in blade for wide crosscuts
+15 amp motor for sustained cutting power
+Extension table for supporting long boards
+Single bevel for angled cuts
+Corded power for continuous use
Cons−Corded power limits placement to outlet reach
How pros and cons are picked (About: Disclaimer) About this product
Lazyland
Table, 10 in, 13 A and up
+10 in blade for wide rip cuts
+15 amp motor for sustained cutting power
+Foldable stand for storage and transport
$209.99
as of 11/04/2026 09:37 PST - DetailsProduct details
About this product
Prostormer
Table, 10 in, 13 A and up
+10 in blade for wide rip cuts
+15 amp motor for sustained cutting power
+Folding stand for storage and transport
$209.99
as of 11/04/2026 09:37 PST - DetailsProduct details
About this product
Prostormer
Table, 10 in, 13 A and up
+10-inch blade for standard sheet and board cuts
+Includes a stand for a fixed work height
+Extendable table supports longer workpieces
$209.99
as of 11/04/2026 00:46 PST - DetailsProduct details
About this product
MarvTool
Miter, Corded, 10 in, 13 A and up
$219.99
as of 11/04/2026 00:07 PST - Details
