Skil
Table, Corded, 10 in, 13 A and up
+Folding stand makes transport easier
+13 amp or higher corded motor
+10 inch blade for cutting wider boards
−Corded power limits movement away from an outlet
$299.00-9%List: $329.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
DEWALT
Table, Corded, 10 in, 13 A and up
+10-inch blade for cutting thick stock
+15-amp corded motor for steady power
+Includes foldable rolling stand for portability
−Corded, so it needs an outlet nearby
$599.00
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+10-inch blade for cutting thick stock
+15-amp corded motor for steady power
+Includes foldable rolling stand for portability
+32-1/2-inch rip capacity for wide panels
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Miter, Corded, 10 in, 13 A and up
+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
−Single bevel tilts in one direction only
−Corded power limits where it can be used
$277.00
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
Cons−Single bevel tilts in one direction only
−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Miter, Corded, 10 in, 13 A and up
+Fifteen-amp motor for demanding cutting
+Ten-inch blade for wide cuts
+Sliding design for wider crosscuts
−Corded power limits reach away from outlets
No current price. Check it at the store.
Product details
Pros+Fifteen-amp motor for demanding cutting
+Ten-inch blade for wide cuts
+Sliding design for wider crosscuts
+Dual-bevel glide for angled cuts
+Articulated hinge arms reduce saw footprint
Cons−Corded power limits reach away from outlets
How pros and cons are picked (About: Disclaimer) About this product
Vevor
Table, Corded, 10 in, 13 A and up
+Includes a stand for a stable working height
+25 in maximum rip capacity for wide stock
+Cutting speed up to 5000 RPM
−Corded power requires a nearby outlet
No current price. Check it at the store.
Product details
Pros+Includes a stand for a stable working height
+25 in maximum rip capacity for wide stock
+Cutting speed up to 5000 RPM
+Includes a 40-tooth blade
+13 amp motor for demanding cuts
Cons−Corded power requires a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
Vevor
Miter, Corded, 10 in, 13 A and up
+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
$289.90
as of 11/04/2026 07:36 PST - DetailsProduct details
Pros+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
+LED laser alignment for cut guidance
+60-tooth blade for fine crosscuts
How pros and cons are picked (About: Disclaimer) About this product
WEN
Miter, Corded, 10 in, 13 A and up
+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
−Corded power requires a nearby outlet
$257.50-30%List: $369.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
+LED cutline for marking cut lines
+Fan-assisted dust collection
Cons−Corded power requires a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
Evolution
Table, 10 in, 13 A and up
+Includes a wheeled stand for moving the saw
+Portable jobsite design
+Dado plate included for wider grooves
−Draws 13 amps or more, so it needs a robust outlet circuit
$475.00-17%List: $575.00
as of 11/03/2026 22:54 PST - DetailsProduct details
Pros+Includes a wheeled stand for moving the saw
+Portable jobsite design
+Dado plate included for wider grooves
+Includes a zero-clearance throat plate
Cons−Draws 13 amps or more, so it needs a robust outlet circuit
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Table, Corded, 10 in, 13 A and up
+10 inch blade for larger rip cuts
+Rolling stand for moving the saw on site
+Portable design for jobsite use
−Corded, so it needs a power outlet nearby
$549.00-15%List: $649.00
as of 11/04/2026 13:41 PST - DetailsProduct details
About this product
Dovaman
Miter, 10 in, 13 A and up
+Sliding design for wide crosscuts
+Cuts metal and multiple materials
+Two-speed operation for different materials
−Corded, so it needs an outlet nearby
$189.99-14%List: $219.97
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Sliding design for wide crosscuts
+Cuts metal and multiple materials
+Two-speed operation for different materials
+Includes three TCT blades and laser guide
+10-inch blade for cutting thick stock
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Skil
Circular, Corded, 10 in, 13 A and up
+Worm drive design for high torque
+15 amp corded motor for steady power
+Magnesium housing for lighter weight
−Requires a power outlet to operate
$398.40-9%List: $439.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Metabo HPT
Miter, Corded, 10 in, 13 A and up
+10-inch blade for wide crosscuts
+Compound miter with single bevel
+Includes 24-tooth TCT blade
−Corded power limits placement to outlet reach
$139.00-22%List: $179.00
as of 11/04/2026 00:10 PST - DetailsWEN
Miter, Corded, 10 in, 13 A and up
+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
−Single-bevel design only tilts in one direction
$204.00-20%List: $254.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
+Corded 13 A and up motor needs no battery
Cons−Single-bevel design only tilts in one direction
How pros and cons are picked (About: Disclaimer) About this product
Skilsaw
Table, Corded, 10 in, 13 A and up
+Folding stand makes transport easier
+Dado insert plate included for wider grooves
+13 amp or higher corded motor
−Corded power limits movement away from an outlet
$325.99-9%List: $356.98
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
DEWALT
Miter, Corded, 10 in, 13 A and up
+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
−Single bevel tilts in one direction only
−Corded power limits where it can be used
$289.59-1%Was: $291.59
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
+Includes safety goggles
Cons−Single bevel tilts in one direction only
−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
MarvTool
Miter, Corded, 10 in, 13 A and up
+Corded design for continuous power without batteries
+10-inch blade for wide cuts in larger stock
+Single bevel head tilts 0 to 45 degrees
−Single bevel head cuts angles in one direction only
−Cord limits reach to the nearest outlet
$139.99
as of 11/04/2026 00:07 PST - DetailsMarvTool
Table, Corded, 10 in, 13 A and up
+Portable design for moving between job sites
+10-inch blade for common rip and crosscuts
+13 amp motor for steady cutting power
−Corded, so it needs an outlet nearby
$169.99
as of 11/04/2026 00:07 PST - DetailsProstormer
Table, 10 in, 13 A and up
+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
−Corded power limits where it can be used
$209.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
+45° bevel cutting for angled cuts
+Benchtop design suits a small workspace
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Table, Corded, 10 in, 13 A and up
+10-inch blade for common rip and crosscut work
+13 A and up motor for power under load
+Built-in dust collector for cleaner work
−Corded power limits where it can be used
$729.00
as of 11/04/2026 16:43 PST - DetailsProduct details
Pros+10-inch blade for common rip and crosscut work
+13 A and up motor for power under load
+Built-in dust collector for cleaner work
+Scissor stand for a stable base
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Miter, Corded, 10 in, 13 A and up
+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
−Corded, so it needs an outlet nearby
$269.96
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
+Laser guide for marking cut lines
+Includes three TCT blades
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Table, 10 in, 13 A and up
+10-inch blade for cutting thick stock
+15-amp motor for steady power
+5300 RPM copper motor for faster cutting
−Maximum cutting height of 2.48 inches at 45 degrees
No price recorded yet.
Product details
Pros+10-inch blade for cutting thick stock
+15-amp motor for steady power
+5300 RPM copper motor for faster cutting
+Includes stand for a stable work setup
Cons−Maximum cutting height of 2.48 inches at 45 degrees
How pros and cons are picked (About: Disclaimer) About this product
Dekopro
Miter, Corded, 10 in, 13 A and up
+10-inch blade for wide crosscuts
+13-amp motor for cutting dense material
+Miter angles up to 45 degrees
−Single bevel only, no bevel to the other side
−Corded, so it needs a power outlet nearby
$129.99
as of 11/04/2026 16:42 PST - DetailsProduct details
Pros+10-inch blade for wide crosscuts
+13-amp motor for cutting dense material
+Miter angles up to 45 degrees
+5,000 RPM blade speed
Cons−Single bevel only, no bevel to the other side
−Corded, so it needs a power outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
ExploreHorizon
Table, 10 in, 13 A and up
+10-inch blade for wider cuts than smaller table saws
+15-amp motor for demanding cutting work
+Includes a stand for stable use
−Stationary stand design limits portability
$198.99
as of 11/04/2026 05:37 PST - DetailsProduct details
Pros+10-inch blade for wider cuts than smaller table saws
+15-amp motor for demanding cutting work
+Includes a stand for stable use
+Bevel cuts from 0 to 45 degrees
+90-degree crosscut capability
Cons−Stationary stand design limits portability
How pros and cons are picked (About: Disclaimer) About this product
WEN
Miter, Corded, 10 in, 13 A and up
+10-inch blade for medium-sized cuts
+Sliding design for wider crosscuts
+Dual bevel cutting for angled cuts
−Corded power limits placement to outlets
No price recorded yet.
Product details
Pros+10-inch blade for medium-sized cuts
+Sliding design for wider crosscuts
+Dual bevel cutting for angled cuts
+Corded power with 13 A or higher motor
Cons−Corded power limits placement to outlets
How pros and cons are picked (About: Disclaimer) About this product
PioneerWorks
Table, 10 in, 13 A and up
+10-inch blade for wider cuts than smaller table saws
+15-amp motor for demanding cutting work
+Portable design with a stand included
−Heavier than smaller table saws for carrying
$199.99
as of 11/04/2026 05:37 PST - DetailsProduct details
Pros+10-inch blade for wider cuts than smaller table saws
+15-amp motor for demanding cutting work
+Portable design with a stand included
+Includes a safety switch and push stick
+Bevel cuts from 0 to 45 degrees
Cons−Heavier than smaller table saws for carrying
How pros and cons are picked (About: Disclaimer) About this product
Towallmark
Table, 10 in, 13 A and up
+Includes a stand for stable use
+10 inch blade for larger cuts than compact saws
+Supports 90 degree cross cuts and 0 to 45 degree bevel cuts
−Stand adds bulk for carrying to different locations
$199.99
as of 11/04/2026 05:37 PST - DetailsProduct details
Pros+Includes a stand for stable use
+10 inch blade for larger cuts than compact saws
+Supports 90 degree cross cuts and 0 to 45 degree bevel cuts
Cons−Stand adds bulk for carrying to different locations
How pros and cons are picked (About: Disclaimer) About this product
Genesis
Miter, Corded, 10 in, 13 A and up
+15 amp motor for strong cutting power
+10 inch blade for wide cuts
+Laser guide helps align cut lines
−Corded only, so it needs an outlet nearby
$164.35
as of 11/03/2026 23:10 PST - DetailsProduct details
Pros+15 amp motor for strong cutting power
+10 inch blade for wide cuts
+Laser guide helps align cut lines
+Nine positive miter stops for repeatable angles
Cons−Corded only, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
MarvTool
Table, Corded, 10 in, 13 A and up
+Portable benchtop design for moving between job sites
+10-inch blade for common rip and crosscuts
+13 amp motor for steady cutting power
−Corded, so it needs an outlet nearby
$199.99
as of 11/04/2026 00:07 PST - Details
