DEWALT
Miter, Cordless, 18V or 20V, 10 in
+10 in blade for wider cutting capacity
+Double bevel design for angled cuts
+Cordless design for cutting without a cord
−Bare tool only, battery and charger sold separately
$299.00-27%Was: $407.07
as of 11/03/2026 22:38 PST - DetailsProduct details
Pros+10 in blade for wider cutting capacity
+Double bevel design for angled cuts
+Cordless design for cutting without a cord
+Runs on 18V or 20V batteries
Cons−Bare tool only, battery and charger sold separately
How pros and cons are picked (About: Disclaimer) About this product
Skil
Table, Corded, 10 in, 13 A and up
+Folding stand makes transport easier
+13 amp or higher corded motor
+10 inch blade for cutting wider boards
−Corded power limits movement away from an outlet
$299.00-9%List: $329.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
DEWALT
Table, Corded, 10 in, 13 A and up
+10-inch blade for cutting thick stock
+15-amp corded motor for steady power
+Includes foldable rolling stand for portability
−Corded, so it needs an outlet nearby
$599.00
as of 11/03/2026 22:39 PST - DetailsProduct details
Pros+10-inch blade for cutting thick stock
+15-amp corded motor for steady power
+Includes foldable rolling stand for portability
+32-1/2-inch rip capacity for wide panels
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Miter, Corded, 10 in, 13 A and up
+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
−Single bevel tilts in one direction only
−Corded power limits where it can be used
$279.00
as of 11/03/2026 22:39 PST - DetailsProduct details
Pros+13 A and up motor for power under load
+Corded power for continuous use without a battery
+Compound design makes angled miter and bevel cuts
Cons−Single bevel tilts in one direction only
−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Miter, Corded, 10 in, 13 A and up
+Fifteen-amp motor for demanding cutting
+Ten-inch blade for wide cuts
+Sliding design for wider crosscuts
−Corded power limits reach away from outlets
No current price. Check it at the store.
Product details
Pros+Fifteen-amp motor for demanding cutting
+Ten-inch blade for wide cuts
+Sliding design for wider crosscuts
+Dual-bevel glide for angled cuts
+Articulated hinge arms reduce saw footprint
Cons−Corded power limits reach away from outlets
How pros and cons are picked (About: Disclaimer) About this product
Milwaukee
Miter, Cordless, 18V or 20V, 10 in
+10-inch blade for deeper cuts
+Sliding design for wider cuts
+Dual bevel for angled cuts
−Tool only, batteries and charger sold separately
No current price. Check it at the store.
Product details
About this product
Vevor
Table, Corded, 10 in, 13 A and up
+Includes a stand for a stable working height
+25 in maximum rip capacity for wide stock
+Cutting speed up to 5000 RPM
−Corded power requires a nearby outlet
No current price. Check it at the store.
Product details
Pros+Includes a stand for a stable working height
+25 in maximum rip capacity for wide stock
+Cutting speed up to 5000 RPM
+Includes a 40-tooth blade
+13 amp motor for demanding cuts
Cons−Corded power requires a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
Vevor
Miter, Corded, 10 in, 13 A and up
+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
$289.90
as of 11/04/2026 07:36 PST - DetailsProduct details
Pros+10 inch blade for standard miter cuts
+Double bevel head for angled cuts on both sides
+Sliding design for wider cut capacity
+LED laser alignment for cut guidance
+60-tooth blade for fine crosscuts
How pros and cons are picked (About: Disclaimer) About this product
Milwaukee
Miter, Cordless, 18V or 20V, 10 in
+10 inch blade for wider miter cuts
+Dual bevel and sliding head capability
+Cordless operation on 18V or 20V power
$699.00
as of 11/04/2026 00:04 PST - DetailsProduct details
About this product
WEN
Miter, Corded, 10 in, 13 A and up
+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
−Corded power requires a nearby outlet
$257.50-30%List: $369.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+15 amp motor for demanding cuts
+Sliding design for wider cuts
+Dual-bevel capability for compound angles
+LED cutline for marking cut lines
+Fan-assisted dust collection
Cons−Corded power requires a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
Evolution
Table, 10 in, 13 A and up
+Includes a wheeled stand for moving the saw
+Portable jobsite design
+Dado plate included for wider grooves
−Draws 13 amps or more, so it needs a robust outlet circuit
$475.00-17%List: $575.00
as of 11/03/2026 22:54 PST - DetailsProduct details
Pros+Includes a wheeled stand for moving the saw
+Portable jobsite design
+Dado plate included for wider grooves
+Includes a zero-clearance throat plate
Cons−Draws 13 amps or more, so it needs a robust outlet circuit
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Table, Corded, 10 in, 13 A and up
+10 inch blade for larger rip cuts
+Rolling stand for moving the saw on site
+Portable design for jobsite use
−Corded, so it needs a power outlet nearby
$549.00-15%List: $649.00
as of 11/03/2026 22:11 PST - DetailsProduct details
About this product
Dovaman
Miter, 10 in, 13 A and up
+Sliding design for wide crosscuts
+Cuts metal and multiple materials
+Two-speed operation for different materials
−Corded, so it needs an outlet nearby
$189.99-14%List: $219.97
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Sliding design for wide crosscuts
+Cuts metal and multiple materials
+Two-speed operation for different materials
+Includes three TCT blades and laser guide
+10-inch blade for cutting thick stock
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Skil
Miter, 10 in
$249.00-11%List: $279.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Skil
Circular, Corded, 10 in, 13 A and up
+Worm drive design for high torque
+15 amp corded motor for steady power
+Magnesium housing for lighter weight
−Requires a power outlet to operate
$398.40-9%List: $439.99
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Powermatic
Table, Corded, 10 in
+10-inch blade for cutting thick stock
+30-inch rip capacity for wide panels
+1-3/4 HP motor runs on 115 or 230V
−Corded design needs a nearby outlet
$3,042.89-8%Was: $3,299.00
as of 11/04/2026 00:44 PST - DetailsProduct details
About this product
Metabo HPT
Miter, Corded, 10 in, 13 A and up
+10-inch blade for wide crosscuts
+Compound miter with single bevel
+Includes 24-tooth TCT blade
−Corded power limits placement to outlet reach
$139.00-22%List: $179.00
as of 11/04/2026 00:10 PST - DetailsWEN
Miter, Corded, 10 in, 13 A and up
+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
−Single-bevel design only tilts in one direction
$204.00-20%List: $254.99
as of 11/04/2026 07:41 PST - DetailsProduct details
Pros+10-inch blade suits common framing and trim cuts
+Sliding design gives a wider cutting capacity
+Built-in laser helps line up cut marks
+Corded 13 A and up motor needs no battery
Cons−Single-bevel design only tilts in one direction
How pros and cons are picked (About: Disclaimer) About this product
Bosch
Miter, Cordless, 18V or 20V, 10 in
+10 inch blade for cutting wider boards
+Dual-bevel head for angled cuts in both directions
+Sliding design for cutting wide stock
−Bare tool needs a separate battery and charger
$399.00-11%List: $449.00
as of 11/03/2026 22:11 PST - DetailsProduct details
Pros+10 inch blade for cutting wider boards
+Dual-bevel head for angled cuts in both directions
+Sliding design for cutting wide stock
+Cordless 18V or 20V operation
+Ships as a bare tool without battery
Cons−Bare tool needs a separate battery and charger
How pros and cons are picked (About: Disclaimer) About this product
Skilsaw
Table, Corded, 10 in, 13 A and up
+Folding stand makes transport easier
+Dado insert plate included for wider grooves
+13 amp or higher corded motor
−Corded power limits movement away from an outlet
$325.99-9%List: $356.98
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Skil
Miter, 10 in
+Dual bevel for angled cuts on both sides
+Sliding design for wider cuts
+10 in blade for larger cuts
−Sliding design takes more shop space
$344.99-7%Was: $370.22
as of 11/04/2026 03:39 PST - DetailsProduct details
About this product
Powermatic
Table, Corded, 10 in
+10-inch blade for cutting thick stock
+30-inch rip capacity for wide panels
+1-3/4 HP motor runs on 115 or 230V
−Corded design needs a nearby outlet
$3,236.07-7%Was: $3,492.48
as of 11/04/2026 00:44 PST - DetailsProduct details
Pros+10-inch blade for cutting thick stock
+30-inch rip capacity for wide panels
+1-3/4 HP motor runs on 115 or 230V
+Includes a mobile base for moving the saw
Cons−Corded design needs a nearby outlet
How pros and cons are picked (About: Disclaimer) About this product
MarvTool
Miter, Corded, 10 in, 13 A and up
+Corded design for continuous power without batteries
+10-inch blade for wide cuts in larger stock
+Single bevel head tilts 0 to 45 degrees
−Single bevel head cuts angles in one direction only
−Cord limits reach to the nearest outlet
$139.99
as of 11/04/2026 00:07 PST - DetailsMarvTool
Table, Corded, 10 in, 13 A and up
+Portable design for moving between job sites
+10-inch blade for common rip and crosscuts
+13 amp motor for steady cutting power
−Corded, so it needs an outlet nearby
$169.99
as of 11/04/2026 00:07 PST - DetailsProstormer
Table, 10 in, 13 A and up
+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
−Corded power limits where it can be used
$209.99
as of 11/04/2026 00:46 PST - DetailsProduct details
Pros+10-inch blade for standard sheet and board cuts
+13 A motor for steady cutting power
+Includes a stand for a fixed work height
+45° bevel cutting for angled cuts
+Benchtop design suits a small workspace
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
DEWALT
Table, Corded, 10 in, 13 A and up
+10-inch blade for common rip and crosscut work
+13 A and up motor for power under load
+Built-in dust collector for cleaner work
−Corded power limits where it can be used
$729.00
as of 11/03/2026 22:39 PST - DetailsProduct details
Pros+10-inch blade for common rip and crosscut work
+13 A and up motor for power under load
+Built-in dust collector for cleaner work
+Scissor stand for a stable base
Cons−Corded power limits where it can be used
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Miter, Corded, 10 in, 13 A and up
+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
−Corded, so it needs an outlet nearby
$269.96
as of 11/03/2026 22:42 PST - DetailsProduct details
Pros+Sliding design for wide crosscuts
+Dual bevel for angled cuts on both sides
+10-inch blade for cutting thick stock
+Laser guide for marking cut lines
+Includes three TCT blades
Cons−Corded, so it needs an outlet nearby
How pros and cons are picked (About: Disclaimer) About this product
Dovaman
Table, 10 in, 13 A and up
+10-inch blade for cutting thick stock
+15-amp motor for steady power
+5300 RPM copper motor for faster cutting
−Maximum cutting height of 2.48 inches at 45 degrees
No price recorded yet.
Product details
Pros+10-inch blade for cutting thick stock
+15-amp motor for steady power
+5300 RPM copper motor for faster cutting
+Includes stand for a stable work setup
Cons−Maximum cutting height of 2.48 inches at 45 degrees
How pros and cons are picked (About: Disclaimer) About this product
